Cracked wheel repair in Houston

Cracked wheel and rim repair in Houston

Quick answer: Houston Wheel Repair TIG-welds most cracked aluminum and alloy wheels in-house. Crack welding is a $50 add-on per wheel on top of the repair price, which starts at $95 for cosmetic repair or $115 for a bent rim on a 13-inch wheel and goes up with wheel size. Some cracks can’t be welded safely, so we inspect every wheel first. Call 713-942-0294.

Potholes, curbs and metal fatigue crack a lot of wheels in Houston. A cracked rim can leak air and the crack can grow. Houston Wheel Repair welds most cracked aluminum and alloy wheels at our shop with high-quality TIG welding, so you can keep your wheel instead of buying a new one.

Can my cracked rim be welded?

If your wheel is cracked in the middle or on the back side of the lip (behind the spokes), it can most likely be welded. If a crack can’t be welded properly, or it is in an unsafe spot, we will not weld it. We will tell you, and we offer refurbished rims if your wheel can’t be repaired. To find out if your wheel is a good candidate, call 713-942-0294.

How to fix a cracked aluminum rim

Quick answer: A cracked aluminum or alloy rim is fixed by TIG welding the crack, then smoothing and checking the wheel so it holds air. It’s not a do-it-yourself job: glue, epoxy and sealant won’t hold under tire pressure and can hide a crack that keeps growing. Houston Wheel Repair TIG-welds most cracked rims in-house. Welding is a $50 add-on per wheel on top of the repair price.

Signs your rim is cracked

  • The tire keeps losing air and no nail or puncture can be found.
  • You can see a thin line on the inner barrel, often near a bend from a pothole.
  • Soapy water bubbles along a line on the rim when the tire is aired up.

What not to do

  • Don’t seal the crack with epoxy, JB Weld or tire sealant and keep driving on it.
  • Don’t run the tire low to stop the leak. That stresses the crack more.
  • Don’t let a general welding shop weld it unless they work on aluminum wheels. Wheel aluminum needs the right TIG process and filler.

Wheel welding: how we weld cracked aluminum wheels

We use high-quality aluminum TIG (tungsten inert gas) welding. A tungsten electrode makes the weld, and argon gas protects it from contamination. TIG welding is harder to master than most welding methods. Our crack repair team was trained by a master certified welder who specializes in aluminum wheels, and we use top-quality Miller welding equipment.

  1. Inspect. We find the whole crack and check the wheel for bends.
  2. Prep. We clean the area so the weld bonds to bare metal.
  3. Weld. We TIG weld the crack.
  4. Finish. We smooth the weld and, if you want, refinish the wheel so the repair doesn’t show.
  5. Check. We make sure the wheel holds air before you pick it up.

Is the wheel bent too? We can fix that too. See bent wheel repair.

Aluminum and alloy wheel repair

Most car and truck wheels today are made of aluminum alloy. They are light and look great, but potholes and curbs can crack them, bend them or scrape them, and the finish can corrode over time. Houston Wheel Repair fixes all of these at our shop:

How much does it cost to weld a cracked rim?

Crack welding is an add-on: +$50 per wheel on top of the repair price, for every wheel size.

Wheel Repair Prices (per wheel)

All prices are STARTING PRICES. This is a ballpark estimate, not a final quote. Prices may change depending on how severe the damage is and whether the damage is on the face of the wheel or the rear of the wheel.

Wheel sizeCurb rash / cosmeticStraighten (bent)Crack weld (add-on)
13"$95$115+$50
14"$105$120+$50
15"$115$130+$50
16"$125$135+$50
17"$135$145+$50
18"$145$165+$50
19"$155$170+$50
20"$165$175+$50
21"$175$185+$50
22"$185$195+$50
24"$200$210+$50
26"$225$235+$50
28"$250$265+$50
30"$285$300+$50
  • Chrome, two-piece and three-piece wheels are quoted after we see them.
  • Mounting and balancing: ask us when you call.

Call 713-942-0294 or use our free quote form, and we will tell you your exact price before we start.

Common questions

How do you fix a cracked aluminum rim?
The crack is cleaned to bare metal, TIG welded, smoothed, and the wheel is checked to make sure it holds air. If it’s bent too, it’s straightened first.

Can I fix a cracked rim with epoxy or JB Weld?
No. Epoxy can’t hold against tire pressure and road impacts, and the crack keeps growing underneath. A crack in a safe spot should be welded; one in an unsafe spot means the wheel should be replaced.

Who fixes cracked rims in Houston?
Houston Wheel Repair welds cracked aluminum and alloy rims at 7070 Southwest Fwy, Suite A. Call 713-942-0294 to see if your wheel can be welded.

Can every cracked rim be welded?
No. Cracks in the middle of the barrel or on the back of the lip usually can. If a crack is in an unsafe spot, we won’t weld it, and we’ll offer a refurbished rim instead.

Is a welded rim safe?
When the crack is in a safe spot and welded properly, yes. If a crack is in an unsafe location, we will not weld it.

Can you weld an aluminum wheel?
Yes. We TIG weld most cracked aluminum and alloy wheels. If the crack is in an unsafe spot, we will not weld it, and we will tell you.

How much does wheel welding cost?
Crack welding is a +$50 add-on per wheel, on top of the repair price, for every wheel size. See the price table above.

What causes cracked rims?
Most cracks come from potholes, hitting curbs, or metal fatigue over time.

How long does crack repair take?
It depends on the crack and the wheel. Call and we will give you a time.

¿Hablan español?
Sí. Se habla español. Vea nuestra página en español.

Where are you, and when are you open?
7070 Southwest Fwy, Suite A, Houston, TX 77074. Open Monday to Saturday, 9 AM to 8 PM. We serve Houston, Pasadena, Pearland, Sugar Land, League City, Conroe, The Woodlands, Baytown, Missouri City, Katy, Galveston, Texas City and Bellaire.