Bent wheel repair in Houston

Bent wheel and rim repair in Houston

Quick answer: Bent rim repair at Houston Wheel Repair starts at $115 for a 13-inch wheel and goes up to $300 for a 30-inch wheel ($145 for 17-inch, $165 for 18-inch, $175 for 20-inch). If the bend also cracked the rim, welding adds $50. These are starting prices; we confirm the final price after we inspect your wheel. Call 713-942-0294 or stop by 7070 Southwest Freeway, Suite A.

Hit a pothole or a curb? A bent rim usually won’t hold air. You get a slow leak, a shake in the steering wheel, or a tire that keeps losing pressure. Houston Wheel Repair straightens bent alloy and aluminum wheels back to their original factory specs, in most cases with little or no down time, for a fraction of the price of a new wheel. Just hit a pothole? Our Houston pothole guide shows what to check, how to report it and whether the city will pay.

Signs your wheel is bent

  • A tire that keeps losing air or has a slow leak
  • A vibration or shake, especially at highway speed
  • A dent or flat spot you can see on the lip of the rim
  • Uneven tire wear, or the car pulling to one side

Bent rim repair cost in Houston

Straightening a bent wheel starts at $115 for a 13-inch wheel and goes up with wheel size. Curb rash and cosmetic repair, and crack welding, are priced in the same table.

Wheel Repair Prices (per wheel)

All prices are STARTING PRICES. This is a ballpark estimate, not a final quote. Prices may change depending on how severe the damage is and whether the damage is on the face of the wheel or the rear of the wheel.

Wheel sizeCurb rash / cosmeticStraighten (bent)Crack weld (add-on)
13"$95$115+$50
14"$105$120+$50
15"$115$130+$50
16"$125$135+$50
17"$135$145+$50
18"$145$165+$50
19"$155$170+$50
20"$165$175+$50
21"$175$185+$50
22"$185$195+$50
24"$200$210+$50
26"$225$235+$50
28"$250$265+$50
30"$285$300+$50
  • Chrome, two-piece and three-piece wheels are quoted after we see them.
  • Mounting and balancing: ask us when you call.

Call 713-942-0294 or use our free quote form, and we will tell you your exact price before we start.

How we fix a bent wheel

  1. Find every bend. We check the whole wheel, inside and out, for bends, dents and cracks.
  2. Straighten it. We bring the wheel back to round, to its original factory specs, checking it as we go.
  3. Weld if needed. If the lip is cracked, we weld it. See cracked wheel repair.
  4. Fix the looks. Our reconditioning tools, paints and clear coat process remove curb rash, scrapes, gouges and fading, and match the finish to your other wheels. Polished aluminum wheels can look like new again too.
  5. Final check. We make sure the wheel is straight and holds air before you drive away.

Can you fix a bent rim yourself?

Quick answer: Not safely. Hammering, heating or jacking a bent alloy rim back into shape can leave hidden cracks and weak metal, and the wheel can fail later at highway speed. A bent rim should be straightened by a wheel shop that measures it, straightens it to factory specs and checks it holds air. At Houston Wheel Repair, straightening starts at $115 a wheel (13-inch).

What to do right after you bend a rim

  1. Check the tire. Look for a bulge or cut in the sidewall, and check the pressure. A bulge means the tire needs replacing.
  2. Drive gently. If the car shakes or the tire keeps losing air, use the spare or get a tow.
  3. Look for cracks. A crack along the bend usually needs welding too. See crack repairs.
  4. Get it straightened soon. A bent rim wears out tires and suspension parts, and a slow leak can turn into a flat.

Hit a pothole on a Houston road? Our pothole guide shows how to report it and when the city or state may pay for the damage.

Repair or replace?

Most bent wheels can be repaired for much less than a new wheel. If a wheel is too damaged, or cracked in an unsafe spot, we will tell you, and we offer refurbished rims. Compare the numbers in our guide: wheel repair vs replacement cost.

Common questions

How do you fix a bent rim on a car?
A wheel shop takes the tire off, finds every bend, straightens the wheel back to round, checks it for cracks, then remounts and balances the tire. At our shop it starts at $115 for a 13-inch wheel.

Can you fix a dented rim?
Usually, yes. A dent or flat spot on the lip is a bend, and most can be straightened. If the dent cracked the rim, we weld it too (+$50).

Is it safe to drive on a bent rim?
Not for long. A bent rim can leak air, wear out the tire and cause a blowout. Get it checked as soon as you can.

Who straightens bent wheels in Houston?
Houston Wheel Repair straightens bent alloy and aluminum wheels at 7070 Southwest Fwy, Suite A. Call 713-942-0294.

Should I repair or replace a bent rim?
Most bent rims cost far less to repair than to replace. If a wheel isn’t safe to fix, we’ll tell you and offer a refurbished rim. See wheel repair vs. replacement cost.

How much does it cost to fix a bent rim?
Straightening starts at $115 for a 13-inch wheel, $135 for 16-inch, $165 for 18-inch and $175 for 20-inch. These are starting prices; your exact price depends on how bad the damage is.

Can every bent rim be fixed?
Most can. If yours is not safe to repair, we will tell you and offer a refurbished rim instead.

How long does bent wheel repair take?
In most cases there is little or no down time. Call and we will tell you how long your wheel will take.

Do you fix alloy and aluminum wheels?
Yes. We straighten and repair alloy and aluminum rims, including polished aluminum.

¿Hablan español?
Sí. Se habla español. Vea nuestra página en español.

How can I tell if my rim is bent?
The usual signs are a shake that gets worse as you speed up, a tire that keeps losing air with no nail in it, and a wobble you can see when the wheel turns. Many bends are on the inside lip, so you can’t see them from the outside. If you hit a pothole or curb and notice any of these, bring the car in and we’ll spin the wheel on our machine to find the bend.

What causes a rim to bend?
Usually one hard hit: a pothole, a curb, a raised manhole cover or debris on the freeway. Low-profile tires and low tire pressure leave less cushion, so the rim takes more of the hit. In Houston, standing water after a storm can hide potholes until you’re already in them.

Can a tire shop straighten a bent rim?
Most tire shops can’t. They can mount tires, balance wheels and fix flats, but straightening a rim takes a wheel-straightening machine. Some send the wheel out. We straighten wheels in our own shop, starting at $115 a wheel. More in our guide: Does Discount Tire fix rims?

Where are you, and when are you open?
7070 Southwest Fwy, Suite A, Houston, TX 77074. Open Monday to Saturday, 9 AM to 8 PM. We serve Houston, Pasadena, Pearland, Sugar Land, League City, Conroe, The Woodlands, Baytown, Missouri City, Katy, Galveston, Texas City and Bellaire.